R6,495.00
The bestseller. High performance and complete safety.
Make | VW |
---|---|
Model | T6 (SG) 2015- |
Engine | 2.0 TDI 103kW 1968ccm |
Stock kW | 103kW |
RaceChip kW | 117kW |
Stock Nm | 340Nm |
RaceChip Nm | 394Nm |
Vehicle Id | 534572 |
GTIN | 4062009313617 |
We generally recommend completely removing the RaceChip module prior to service in order to allow the garage to provide service based on a series vehicle.
We also wish to point out that some manufacturers, when performing a readout of the vehicle's memory, also analyse relevant vehicle performance data, and in doing so they may try to determine whether a performance enhancement has been installed. In the case of OBD tuning (i.e. an active alteration of the manufacturer's software), the presence of a performance enhancement can be determined and verified. But with RaceChip technology (an additional control unit) the manufacturer's hardware and software remain unchanged. If chip tuning is not located in the engine, then the data can only hint at an electronic performance enhancement. Similar data can also be produced, in some cases, by series production deviations on the part of the manufacturer.
You don't have to do anything special for automotive service at the garage, as all of the manufacturer systems remain unchanged with performance enhancement from RaceChip.
The chip tuning can be easily re-installed after service.
No. A diagnostic device only reads out the data saved to the vehicle's own engine control unit. The RaceChip has absolutely no interaction with the engine control unit.
Sometimes diagnostic devices show error messages stemming from the control unit. However, these cannot be attributed to the installation of the RaceChip.
Yes. RaceChip products are designed for problem-free installation with the aid of our instructions and videos provided.
In some individual cases where users have issues, our customer service is available for advice.
No. You can install RaceChip with no specialist mechanical know-how.
In rare cases the air filter box must be disassembled in order to reach the sensor. In these cases we recommend finding a garage if you don't have mechanical know-how. Special tools are not necessary for the actual installation of the chip.
You should install RaceChip products according to installation instructions. Use the existing vehicle cable harness for the auxiliary cable harness. The module itself must be firmly attached and may not be attached on the following areas: Very hot components, strongly vibrating components, moist spaces
Follow the instruction manual and check out available videos if needed. If in doubt, contact our customer service.
If the pictures we provide are not helpful with assembly, then you can send us pictures of your engine so that we can mark the relevant plug for installation
Simply call or email our customer service, and we'll be happy to give you vehicle-specific photos.
You can request vehicle-specific pictures from our customer services over the phone or by email if the instruction manual provided is not helpful.
We will send you additional installation pictures from our customer service upon request.
You'll find a number of vehicle-specific installation videos in our video databank. Our videos can be found here or directly on YouTube on the RaceChip channel.
We do not offer this service. If your contact our customer service, one of our technicians will gladly talk you through how to connect the cable harness and auxiliary device over the phone. This way you can perform the installation yourself within minutes. We are very proud that every customer can install RaceChip chip tuning products without any technical expertise.
The RaceChip module can be installed at independent garages.
This cannot happen when you follow proper procedure. Our products are developed according to the Plug&Drive principle. This means that their functions may be complex, but installation should be as simple as possible. All of our products are delivered with extensive tips for installation.
Please contact our technical customer support.
Please contact our technical customer support. If the LED does not light up, this can have various causes.
Yes! As soon as you've completely uninstalled the RaceChip product and all plug connections are connected in the original condition, then the vehicle is in series condition.
Yes. After full de-installation, there are no discernible signs that an additional device was installed in the engine bay.
A readout of the performance data from a vehicle memory can provide an indication that a performance enhancement was installed. However, this cannot give concrete evidence of the installation of an electronic performance enhancement that uses auxiliary boxes. In addition, this data is read out and assessed in the workshop by very few manufacturers. You can find more information in our Questions and Answers section under the Installation and Removal topic. Our Customer Service staff is of course also available to help and advise you.
Other types of tuning (e.g. OBD) overwrite the engine's control software directly, in a way that is recognizable.
The plug is affixed with a simple locking mechanism at the sensor. Loosen this latch and the plug can be pulled off easily.
Sometimes the plug delivered looks a little different than the vehicle's plugs. However, the plugs can still connect together without any problem and the technical function of the connector will not be affected because we use OEM quality plugs.
Sometimes a manufacturer uses different connection types in a series. If this is the case for your vehicle, please contact our customer service. Then we can arrange to switch out the cable.